Continuous Hinges: Mild Steel Stainless Steel Galvabond Aluminium Zincanneal Distributors Contact Us  
   
Continuous Hinges – Mild Steel  
We have a large selection of Mild steel Hinges in different material Thicknesses and open sizes. Our range includes a:

STANDARD IN STOCK RANGE (SISR)
We have a standard in stock range (SISR) which is a selection of our most popular sizes. These items are in stock and can be shipped out on the next business day*
This range is hilighted in the table below and the part number ends in SISR.

STANDARD MADE TO ORDER RANGE
All of the other items in the table are made to order. The general lead time to manufacture these products is 5 to 7 working days.
    MATERIAL INFORMATION
Mild steel contains the same properties as iron, although it has increased carbon content. Mild steel is the most common form of steel as it is relatively low cost and provides material properties accepted for many applications. However, this also makes it susceptible to rusting; this occurs when the material comes in contact with water and oxygen. Where salt is present, usually in salt water, the effect is exaggerated.

MATERIAL THICKNESS (mm) SIZE OPEN FLAT (mm) PIN DIAMETER
(mm)
Part Number
1828mm long
Part Number
2438mm long
Minimum Order
Quantity
M.O.Q
0.9 25 3.15 m/steel 259M18SISR 259M24 11
32 329M18 329M24 10
38 389M18 389M24 9
50 509M18 509M24 7
76 769M18 769M24 5
100 1009M18 1009M24 4
1.2 25 3.15 m/steel 2512M18 2512M24 11
32 3212M18SISR 3212M24 10
38 3812M18SISR 3812M24 9
50 5012M18SISR 5012M24 7
76 7612M18 7612M24 5
100 10012M18 10012M24 4
1.5 32 5.0 m/steel 3215M18 3215M24 8
38 3815M18SISR 3815M24 7
50 5015M18 5015M24 6
57 5715M18 5715M24 6
64 6415M18 6415M24 5
76 7615M18 7615M24 5
100 10015M18 10015M24 5
2 50 6.35 m/steel 502M18 502M24SISR 6
64 642M18 642M24 5
76 762M18 762M24SISR 4
100 1002M18 1002M24 3
125 1252M18 1252M24 3
150 1502M18 1502M24 3
3 50 8.0 m/steel 503M18 503M24 5
76 763M18SISR 763M24 4
100 1003M18SISR 1003M24SISR 3
125 1253M18 1253M24 3
150 1503M18 1503M24 3
 

ORDERING HINGE
Simply quote the part number and
the quantity that you need.

Place order via Email


       
Do you need a smaller quantity of hinge?
Are you under our Minimum order quantities?
     
If you need a few lengths of hinge for a job or a personal project you can purchase our continuous hinges through our distributors in NSW and Victoria.

No minimum order quantities apply. See our distributors here.

*Although WCH will endeavour to have the hinge in stock at all times if for some reason we are out of stock lead times will be 2 to 3 working days plus time for freight.

* Depends upon availability of material
. Does not include time for delivery. 
Applies only to standard items listed here. 
All sizes are nominal
. All dimensions are in millimeters
.

Windeyer Continuous Hinges Pty Ltd reserves the right to alter or withdraw any specification with notice.
Home | Custom Made Hinges | Smart Blank | TBX Series | Continuous Hinges: Mild Steel, Stainless Steel, Galvabond, Aluminium, Zincanneal | Distributors | Contact | Site map
Windeyer Continuous Hinges Pty Ltd: 4 Lincoln St, Minto NSW 2566 | Phone: (02) 8734 3038 | Fax: (02) 8734 3040 | Email: windeyer@continuoushinges.com.au